stock gsr full bolt ons

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
bonez727
Posts: 5
Joined: Sat May 09, 2015 6:49 pm

stock gsr full bolt ons

Post by bonez727 »

I'm new to tuning and hondata and in need of a lil help, I have a stock gsr type r rep mani, plm 4 to 1 headers, aem tru cia, 2.5 open pipe, walboro 255, dsm 450cc, when the car is idling my wideband is at 15.4(lean) but when I hit it WB goes all the way to 11.1/10.8(dumb rich) and the black smoke starts to roll smh any suggestions or calibrations are greatly appreciated
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: stock gsr full bolt ons

Post by Spunkster »

You should get this properly tuned on the dyno.
bonez727
Posts: 5
Joined: Sat May 09, 2015 6:49 pm

Re: stock gsr full bolt ons

Post by bonez727 »

thanks Spunkster thats what I figured
keto06
Posts: 507
Joined: Fri Jul 17, 2009 9:29 pm

Re: stock gsr full bolt ons

Post by keto06 »

viewtopic.php?f=20&t=16050

Give my tune a try. Just change the injectors (fuel trim/offset). Should get you to a dyno.
07 Civic Si Sedan (sold)
17 Civic Si Sedan (daily)
02 RSX Type S (project)
Hit me up for free Hondata Help!
Post Reply