Stock b20b basemap needed non vtec

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
bonez727
Posts: 5
Joined: Sat May 09, 2015 6:49 pm

Stock b20b basemap needed non vtec

Post by bonez727 »

Can anyone help me out with a stock b20b basemap non vtec? I searched and it's all b20v this and b20T that. Thank u in advance.
keto06
Posts: 507
Joined: Fri Jul 17, 2009 9:29 pm

Re: Stock b20b basemap needed non vtec

Post by keto06 »

Are you on the newest version? There should be a stock b20 kal available from the menu. Thats as good as youre going to get until you put it on a dyno or at least get a wideband.
b20kal.PNG
b20kal.PNG (31.26 KiB) Viewed 5876 times
07 Civic Si Sedan (sold)
17 Civic Si Sedan (daily)
02 RSX Type S (project)
Hit me up for free Hondata Help!
hazetuning420
Posts: 14
Joined: Sun Jul 14, 2019 7:49 pm

Re: Stock b20b basemap needed non vtec

Post by hazetuning420 »

TRY A ITR MAP MY B20 LOVED IT, MAKE SURE YOU GO TO MISC TAB ON PARAMETERRS AND DISABLE KNOCK SENSOR, THAN DISABLE VTEC TO IF IS NOT IN THE SAME TAB GO THE VTEC TAB N DISABLE VTEC TOO
Emma07
Posts: 1
Joined: Mon Oct 14, 2019 12:42 pm

Re: Stock b20b basemap needed non vtec

Post by Emma07 »

hazetuning420 wrote: Tue Jul 16, 2019 2:55 pm TRY A ITR MAP MY B20 LOVED IT, MAKE SURE YOU GO TO MISC TAB ON PARAMETERRS AND DISABLE KNOCK SENSOR, THAN DISABLE VTEC TO IF IS NOT IN THE SAME TAB GO THE VTEC TAB N DISABLE VTEC TOO transfers CDG
I want try that
Post Reply