Page 1 of 1

B18C GSR Turbo - Base map Review

Posted: Fri Dec 30, 2016 8:55 am
by Lyle_57IAL
Hey Hondata,

Would you mind reviewing this base map for engine Run in? Currently 6 psi boost cut, vtec disabled, low speed maps only tuned. Would you mind specifically checking the low speed ignition timing tables to see if these are reasonable for a run in tune. There was no detonation on the tune - however just want to make sure these are as minimal as possible in the run in period.

B18C GSR Turbo - 9.0:1 CR - Pump Fuel
- OEM sleeves
- JE Pistons
- Eagle Rods
- ID 1000cc Injectors @ 3 Bar base pressure
- Oem head
- Turbonetics T3/T04B .64AR 57 Trim
- 2.5" Exhaust

Re: B18C GSR Turbo - Base map Review

Posted: Sun Jan 01, 2017 10:29 pm
by Zperformance
Seems okay for a break in basemap.