datalog - O2 sensor going down to 0,01V over 6300rpm on full throttle - please advise

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
SCKAPE
Posts: 5
Joined: Fri Mar 31, 2017 5:49 pm

datalog - O2 sensor going down to 0,01V over 6300rpm on full throttle - please advise

Post by SCKAPE »

datalog - O2 sensor going down to 0,01V over 6300rpm on full throttle - please advise

it happen last monday, was fine yesterday and is happening again today (on sunday im going on sprint event) and i do not know what happening over 6300rpm engine feels like is no power, i notice that at the same time on log O2 sensor dropping from 0,94V into 0,04V. why? what happening?

Image

Image
Post Reply