whats up guys I'm new to the forum. I need a calibration or tune for my car I will provide all info nessicery to have the right calibration sent to me.
I want to say thanks in advance if anyone has anything close so I got a start before I go to tuner!!!
I would like to be around 12psi of boost or ill go for around 8 psi
I'm running 45psi fuel pressure at the fuel filter
D16y7 block
Dragon knife cut crankshaft
bored to 75.5mm
Eagle rods
Carillo (Cp) 9.0:1 pistons
king race bearings
Stock sleeves
Arp head studs
Arp rod bolts
Arp main
Street pro by cometic headgasket
D16Y8 Head
supertech high rpm springs
Supertech ti retainers
Stock camshaft
port and polished
stock y8 intake manifold, fuel rail, and throttle body
aem FPR
ID725cc injector dynamic injectors
(I'm running 45psi fuel pressure at fuel filter)
turbo is a t3/t4 to4e 57 trim turbo
hondata s300v3
hondata 4 bar map sensor
Hondata 4 port boost control solinoid
Tranny S40
4.250 final drive
if any other info is needed please feel free to ask thnks guys and god bless........
turbo mini me y7/y8 id725cc need tune plz help
-
- Posts: 2
- Joined: Fri Feb 16, 2018 11:31 am
-
- Posts: 2
- Joined: Fri Feb 16, 2018 11:31 am