Need help setting a base tune.

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
jayrod1240
Posts: 3
Joined: Mon Oct 29, 2018 12:21 am

Need help setting a base tune.

Post by jayrod1240 » Mon Oct 29, 2018 1:57 am

HI all I just rebuilt my motor and it runs like crap on a tune my friend hooked me up with.
I'm looking to push the car to 625 - 700 hp on E85
My build is a
B18c 84mm darton sleeved block
89mm Scat light weight crank
LS Length connecting rods by Crower 625+rods 22mm pins
9:7:1 Cp pistons
.081mm cometic head gasket
I'm running a 4piston front runner package cylinder head with skunk2 pro 1 cams.
Skunk2 Ultra street race manifold with 74mm throttlebody
Fuel pump is a 520 intank walbro feeding a 8an line and 6an rerurn. With 1700cc ID injectors
I'm running a ac compatable ram style turbo manifold with a Presicion 6266 gen 2 BB turbo.
46mm waste gate.
2.5 inch intercooler piping all around
3 inch exhuast all the way back

Post Reply