B18b forged internals crower 402 cams

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
nick01
Posts: 1
Joined: Tue Oct 22, 2019 4:14 am

B18b forged internals crower 402 cams

Post by nick01 »

Anyone have a map similar to the setup in the title? I have tried the b20nonvtec403 that’s in the new calibration section with a 30-3000 X-series wideband and just wanna make sure that’s closest I can get. I have adjusted the ELD off and am on d10 for the wideband input but I just want to make sure that would be a good base to start with, or should I just use the stock integra map and tune from there?? Car is forged internals 1000cc inj, Walbro255 and AEM fuel pressure set to 45.. NA at the moment

CalibratEd
Posts: 29
Joined: Fri Feb 07, 2020 3:20 pm

Re: B18b forged internals crower 402 cams

Post by CalibratEd »

nick01 wrote:
Thu Feb 13, 2020 3:14 pm
Anyone have a map similar to the setup in the title? I have tried the b20nonvtec403 that’s in the new calibration section with a 30-3000 X-series wideband and just wanna make sure that’s closest I can get. I have adjusted the ELD off and am on d10 for the wideband input but I just want to make sure that would be a good base to start with, or should I just use the stock integra map and tune from there?? Car is forged internals 1000cc inj, Walbro255 and AEM fuel pressure set to 45.. NA at the moment
I would start with a stock tune that matches the head you are running. I can help if you can provide data-logs.

Post Reply