h22a 10psi

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
bboyjesse1
Posts: 1
Joined: Thu Oct 29, 2020 4:38 pm

h22a 10psi

Post by bboyjesse1 »

i ordered a basemap and it didnt go well so im hoping to have more luck here. im using the f20b turbo base map in hondata's calibrations with alittle changes here and there but seems good untill 4500-5000 rpm at 10psi of boost. the rpm will start bouncing and there really no power after that. just wondering if someone can put out there tune thats close to my setup so i can make sure everything is good before i put it on the dyno to fine tune it.

h22a closed deck
eagle rods
type s nippon pistons
balance shaft delete
crower stage 2 cams with bc springs
stock valves
stock intake with butterfly valves deleted
850cc injectors
400lph aem fuelpump
td05 18g turbo
4bar map sensor
2.5 exhaust
dragonfire dizzy with msd coil
nrg sparkplugs gapped to .30
aem wideband set on d14
User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: h22a 10psi

Post by CalibratEd »

Post the tune and a datalog of the issue occurring so we may better help you.

-Ed
Post Reply