B18c base map

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
Tonee009
Posts: 1
Joined: Tue Apr 20, 2021 1:25 pm

B18c base map

Post by Tonee009 »

Hi guys, new to Hondata....
I just finish installed Skun2 IM, Skune stage 2 tuner cams, type R header, AEM cold intake, RDX injectors, 70mm throttle body.
Can someone help with a base map till I get it tune in June. Thanks....
User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: B18c base map

Post by CalibratEd »

Post the calibration file and a datalog so we can help dial it in.

-Ed
SycRedDevil
Posts: 9
Joined: Mon Apr 26, 2021 7:31 am

Re: B18c base map

Post by SycRedDevil »

@ Calibrated - I will be doing the same here as well. New to the thread but dialing in on this one, so I don't start a new thread :-)
User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: B18c base map

Post by CalibratEd »

SycRedDevil wrote: Mon Apr 26, 2021 7:48 am @ Calibrated - I will be doing the same here as well. New to the thread but dialing in on this one, so I don't start a new thread :-)
It is best to start you own thread with information about your build. Once the tuning process starts it may get confusing.

-Ed
SycRedDevil
Posts: 9
Joined: Mon Apr 26, 2021 7:31 am

Re: B18c base map

Post by SycRedDevil »

Got ya. I just found my map for my specific build, and waiting on new 550 injectors.
User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: B18c base map

Post by CalibratEd »

SycRedDevil wrote: Sat May 01, 2021 10:04 am Got ya. I just found my map for my specific build, and waiting on new 550 injectors.
Sounds good.

-Ed
Post Reply