Hondata

Hondata User Forum
It is currently Wed May 22, 2013 5:27 pm

View unanswered posts | View active topics


Board index » s100/s200/s300 » S300 Calibrations

All times are UTC - 8 hours [ DST ]



Post new topic This topic is locked, you cannot edit posts or make further replies.  Page 1 of 1
  [ 5 posts ] 
  Previous topic | Next topic 
Author Message
Don't Walk
 Post subject: Comparing Basemap
PostPosted: Sun Nov 11, 2007 9:49 am 
Offline

Joined: Sun Nov 11, 2007 9:18 am
Posts: 6
Hi guys, I have B18C5 (stock internals) with Revhard Turbo Kit (T3/T4) except I did not use the missing link & FMU that came with it, I ran it instead with Hondata S300, P06 ECU (with VTEC) and RC550 injectors. I download the calibrations file B18c5 with Revhard Turbo SC61.skl and she starts right up with no issues, I took it right away to the tuner for tuning and here's what I got 205whp @ 8psi. I was expecting more than that. Do you guys think I got ripped off for $800 bucks for tuning? I attached the file that was tuned in the Dyno, maybe you guys can have a look at it and give me suggestions......Thanks


Attachments:
My Tuner's Basemap.skl [30.49 KiB]
Downloaded 367 times


Last edited by Don't Walk on Tue Nov 13, 2007 5:28 pm, edited 1 time in total.
Top
 Profile  
 
Spunkster
 Post subject:
PostPosted: Mon Nov 12, 2007 10:49 am 
Offline
Site Admin
User avatar

Joined: Fri Sep 20, 2002 5:06 pm
Posts: 11086
Location: Hondata
I would discuss this with your tuner. You may have an exhaust restriction.
Top
 Profile  
 
Don't Walk
 Post subject:
PostPosted: Tue Nov 13, 2007 12:19 pm 
Offline

Joined: Sun Nov 11, 2007 9:18 am
Posts: 6
Spunkster wrote:
I would discuss this with your tuner. You may have an exhaust restriction.


I upgrade my exhaust from 2.25in to 2.5 in(downpipe, test pipe & catback) 304 stainless mandrel bents, same time when I had the turbo done. I've seen other guys in this forum and ITRCA forum with exact same car, same turbo kit, bone stock motor and stock exhaust system and make 250whp more than mine. any opinion guys?
Top
 Profile  
 
Spunkster
 Post subject:
PostPosted: Tue Nov 13, 2007 2:43 pm 
Offline
Site Admin
User avatar

Joined: Fri Sep 20, 2002 5:06 pm
Posts: 11086
Location: Hondata
Could be your setup, could be tuning, could be anything. You need to talk to the tuner that tuned the car and discuss why it made so little power. He may not have tuned it properly or to it's full potential.
Top
 Profile  
 
Don't Walk
 Post subject:
PostPosted: Tue Nov 13, 2007 4:21 pm 
Offline

Joined: Sun Nov 11, 2007 9:18 am
Posts: 6
Spunkster wrote:
Could be your setup, could be tuning, could be anything. You need to talk to the tuner that tuned the car and discuss why it made so little power. He may not have tuned it properly or to it's full potential.



Thanks for the help......
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic This topic is locked, you cannot edit posts or make further replies.  Page 1 of 1
  [ 5 posts ] 

Board index » s100/s200/s300 » S300 Calibrations

All times are UTC - 8 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 3 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group