connecting to ECU

ROM Editor 4 tuning software questions and answers.
Locked
315Customs
Posts: 14
Joined: Fri Jul 25, 2008 4:21 pm

connecting to ECU

Post by 315Customs »

I need to burn a basemap since I just install my JRSC with 575cc injectors. Do I connect to my ecu from laptop through the datalogging port on my blue interface box. I have a s200
Surgeon General's Warning:
It IS OK to smoke V8's
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

Have you purchased Romeditor 4? Do you have a programmer?
315Customs
Posts: 14
Joined: Fri Jul 25, 2008 4:21 pm

Post by 315Customs »

I downloaded what I thought I had needed from the website. ROM Editor 4 for the software section and I thought I could put a basemap in with just that, my laptop and a cable.
Surgeon General's Warning:
It IS OK to smoke V8's
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

No, to use the software you must purchase it, a programmer and an emulator. If you wish to tune you should just upgrade to an s300 as it will be cheaper and easier than upgrading the proper software and hardware to tune with the s200.
Locked