G-sensor and 2nd ignition trigger question.
Posted: Sun Aug 24, 2008 6:35 pm
I have the G-sensor installed in my S200. Will it still be supported in RomEditor 4? If so I may be upgradng to it or going the S300 route.
Also I plan on adding triggers on the OEM cam gears and simulate TDC and CYL position sensor inouts for the ecu and add the OBD-2 oil pump and CKF sensor for CRK trigger inputs for the OBD-1 ecu. Needless to say I want to ditch the OEM dizzy. I won't mind running waste fire but only have 1 trigger out from ecu. Can we add another trigger to the ecu?
TIA
-Joe
Also I plan on adding triggers on the OEM cam gears and simulate TDC and CYL position sensor inouts for the ecu and add the OBD-2 oil pump and CKF sensor for CRK trigger inputs for the OBD-1 ecu. Needless to say I want to ditch the OEM dizzy. I won't mind running waste fire but only have 1 trigger out from ecu. Can we add another trigger to the ecu?
TIA
-Joe