Check this out

ROM Editor 4 tuning software questions and answers.
Locked
tsrperformance
Posts: 14
Joined: Tue Jul 29, 2008 5:34 pm

Check this out

Post by tsrperformance »

Ok, so I tuned this car last week on a small turbo. Customer changed the turbo and came back for a retune. He changed the turbo and the map sensor. Put it on the dyno, get it rolling to calibrate the dyno and this happens. It only happens going into 3rd gear. Changed ECUs, changed blue boxes, changed interface cables. The only thing i can think of is that my RE4 Cable took a dump on me or my romulator took a dump.
Also, I threw a s300 in just to see and it worked perfectly. So im pretty sure it cant be a harness issue

Thanks for the help
Attachments
korey error.s2d
(79.67 KiB) Downloaded 543 times
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

An actual description of the problem would be really helpful
tsrperformance
Posts: 14
Joined: Tue Jul 29, 2008 5:34 pm

Post by tsrperformance »

as soon as i put it into 3rd gear to calibrate the dyno, the rpm, map, duty, iat, ect, etc. goes irratic and the car tries to jump off of the dyno.

Its hard to explain but in the log it shows what im trying to explain. thanks
tsrperformance
Posts: 14
Joined: Tue Jul 29, 2008 5:34 pm

Post by tsrperformance »

fixed. it was a faulty romulator
Locked