3G TL Stage 2 Bisi cam cold idle misfire

Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)

Post Reply
jevans06
Posts: 1
Joined: Mon Dec 22, 2014 10:57 pm

3G TL Stage 2 Bisi cam cold idle misfire

Post by jevans06 » Mon Dec 22, 2014 11:15 pm

I have a 2006 Acura tl Manual transmission. Mods I have are, 3.7L IM, ZDX TB, 4inch CAI, Ported intake runners, and pocket ported heads.
I recently installed stage 2 cams as well. Ever since then, I have been getting random misfires when the engine is cold at idle. I cannot figure out how to adjust for this.
Any help is appreciated
I have attached a datalog as and my tune as well. Can see the misfires during the idle. These seem to only occur during idle and when the engine is bone cold.
Attachments
Justin_Rev22.fpcal
(8.87 KiB) Downloaded 83 times
datalog0005.fpdl
(2.13 MiB) Downloaded 75 times

User avatar
Spunkster
Site Admin
Posts: 18023
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: 3G TL Stage 2 Bisi cam cold idle misfire

Post by Spunkster » Tue Dec 23, 2014 1:12 pm

Has this been properly tuned on the dyno?

Post Reply