Knock sensor issue
-
- Posts: 110
- Joined: Sun Aug 28, 2011 11:41 pm
Knock sensor issue
Ive been tuning many cars now and I have this TSX that is giving me the business. It is seeing lots of knock in #3 and #1 cylinder along with a little bit in #2. Ive only tuned a handful of cars on Flashpro and the rest on the other systems. This car was a auto to manual swap and it is still on the auto ecu. Its a k24/k20 head with some tuner 1 cams rbc all the bolt ons. Just cant get this setup to quit pulling timing from knock. My customer is over a hour away so I have not got to mess with it to much. Only testing ive got to do is set vtc to 0 to see if that changed it and nothing. Here is the tune file and the datalog with a small wot pull.
- Attachments
-
- Dustin Morgan K24a2-170504-000pull.fpdl
- (4.67 KiB) Downloaded 172 times
-
- Dustin Morgan K24a2-170504-000.fpdl
- (184.25 KiB) Downloaded 165 times
-
- Dustin Morgan K24a2.fpcal
- (16.22 KiB) Downloaded 163 times
Re: Knock sensor issue
Since this has been converted from auto, have you checked to make sure that nothing is loose and rattling which is giving false knock?
-
- Posts: 110
- Joined: Sun Aug 28, 2011 11:41 pm
Re: Knock sensor issue
I informed the person to go through the car for anything loose.
-
- Posts: 7
- Joined: Sat Feb 21, 2015 12:25 pm
Re: Knock sensor issue
The cams might be loud which makes the knock sensor think there is knock