Basemap for 2012 Civic Si, 550cc, E85, 3" exhaust, PRL intake

Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)

Post Reply
schaffertnathan
Posts: 12
Joined: Thu Jun 28, 2018 6:31 am

Basemap for 2012 Civic Si, 550cc, E85, 3" exhaust, PRL intake

Post by schaffertnathan » Mon Aug 13, 2018 11:45 am

Anyone wanna help me out with a basemap for E85 on a k24z7. Much appreciated!

typer86
Posts: 299
Joined: Sun Oct 28, 2012 3:17 pm

Re: Basemap for 2012 Civic Si, 550cc, E85, 3" exhaust, PRL intake

Post by typer86 » Sat Sep 01, 2018 1:21 am

Use a stock map which match your car. Then start tuning.
It is not possible to create a 100% map for each type of modification.

I can e-tune each k engine with each modification. But many hours are required to tune the engine.

@hondata can you create a pinned post with typical etuners which can be contacted to create calibrations/tunes?
Because in this business we must invest a lot of time to read the datalog and setup the calibration. This cycle must be repeat many times until the engine is running perfect/with max power efficiency.

If so I would like to be in your list to make e-tunes for k series engines. Iam specialized for stock, Frankenstein, turbo and supercharged engine modifications.

Post Reply