Live tuning with datalog

Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)

Post Reply
K20remix
Posts: 20
Joined: Wed Oct 24, 2018 10:22 am

Live tuning with datalog

Post by K20remix »

Hi Hondata,

Recently doing on the tuning for my partial throttle.

I have newbie question as below which would nwed clarification for my understanding.

If datalog show negative value means rich,
if surplus value means lean.

How about 0% means?

hope to have your guidance and clarification.
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Live tuning with datalog

Post by Spunkster »

You will need to give more specific detail on where you are referring to these numbers.
K20remix
Posts: 20
Joined: Wed Oct 24, 2018 10:22 am

Re: Live tuning with datalog

Post by K20remix »

Spunkster wrote: Tue Dec 18, 2018 10:33 am You will need to give more specific detail on where you are referring to these numbers.
I get these number in my fuel map tables.

please guide me.
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Live tuning with datalog

Post by Spunkster »

Post your calibration and a datalog showing what you are referring to.
K20remix
Posts: 20
Joined: Wed Oct 24, 2018 10:22 am

Re: Live tuning with datalog

Post by K20remix »

The result of the data log was look like this,
FP low fuel map Capture 1.JPG
FP low fuel map Capture 1.JPG (112.71 KiB) Viewed 3112 times
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Live tuning with datalog

Post by Spunkster »

Those are showing recommended changes: https://www.hondata.com/help/flashpro/s ... sub=lambda

- is for removing
0 means leave alone
+ means add
K20remix
Posts: 20
Joined: Wed Oct 24, 2018 10:22 am

Re: Live tuning with datalog

Post by K20remix »

Noted and thanks for the guidance.

Honda and Hondata Cheers!!
Post Reply