Page 1 of 1

Live tuning with datalog

Posted: Tue Dec 18, 2018 9:21 am
by K20remix
Hi Hondata,

Recently doing on the tuning for my partial throttle.

I have newbie question as below which would nwed clarification for my understanding.

If datalog show negative value means rich,
if surplus value means lean.

How about 0% means?

hope to have your guidance and clarification.

Re: Live tuning with datalog

Posted: Tue Dec 18, 2018 10:33 am
by Spunkster
You will need to give more specific detail on where you are referring to these numbers.

Re: Live tuning with datalog

Posted: Tue Dec 18, 2018 11:40 am
by K20remix
Spunkster wrote:
Tue Dec 18, 2018 10:33 am
You will need to give more specific detail on where you are referring to these numbers.
I get these number in my fuel map tables.

please guide me.

Re: Live tuning with datalog

Posted: Tue Dec 18, 2018 12:04 pm
by Spunkster
Post your calibration and a datalog showing what you are referring to.

Re: Live tuning with datalog

Posted: Tue Dec 18, 2018 7:12 pm
by K20remix
The result of the data log was look like this,
FP low fuel map Capture 1.JPG
FP low fuel map Capture 1.JPG (112.71 KiB) Viewed 1638 times

Re: Live tuning with datalog

Posted: Wed Dec 19, 2018 10:26 am
by Spunkster
Those are showing recommended changes: https://www.hondata.com/help/flashpro/s ... sub=lambda

- is for removing
0 means leave alone
+ means add

Re: Live tuning with datalog

Posted: Thu Dec 20, 2018 2:33 am
by K20remix
Noted and thanks for the guidance.

Honda and Hondata Cheers!!