New base maps and what they are?

Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)

Post Reply
antb41
Posts: 2
Joined: Fri Oct 22, 2021 7:31 am

New base maps and what they are?

Post by antb41 »

Hi,

I have a 2019 hatchback 1.5T 6MT, I have FBO and MHI drop in TD03 turbo upgrade. Currently I'm running the +9psi base map but I was wondering what the new base maps are like. Specifically the Civic-Turbo-MT-2017-2-93octane & Civic-Turbo-MT-2017-2-HighOutput. Has anyone runs these base maps yet and how are they different from the +9psi base maps? Thanks!
Attachments
tune.PNG
tune.PNG (245.89 KiB) Viewed 1116 times
Emount91
Posts: 81
Joined: Fri Aug 02, 2019 2:45 pm

Re: New base maps and what they are?

Post by Emount91 »

I am also very curious about this question.

I've been running the 6+ PSI high octane basemap with adjustments (AFM.v, torque, and ignition) on my car for almost 80,000 miles (2017 Sport CVT).

How do those new calibrations compare to the 6+ PSI high octane basemap? Especially curious about the one that specifically says 93 octane (since that's what I run in my car 100% of the time anyway).

@Hondata

@Spunkster
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: New base maps and what they are?

Post by Hondata »

The 93 octane calibration has more ignition timing vs the 91 octane calibration. The 91 octane high output calibration has the ethanol tables set up. Other than that, very similar.
Hondata
Post Reply