Car is in recovery mode & cant conect with ECU [Flashpro]

FlashPro questions & answers specific to the 2006-2011 Americas Civic Si
Gaby
Posts: 13
Joined: Fri Oct 12, 2018 6:41 pm

Car is in recovery mode & cant conect with ECU [Flashpro]

Post by Gaby » Fri Oct 12, 2018 7:04 pm

So my car was working fine & i decide to program a diferent calibration, so after i programed my Car dont start and cant conect with the ECU of the car. so that means that i cant do nothing about it. id check all fuses and disconect the battery and still in recovery mode. when i conect flashpro with the computer there is a check mark on Driver flashpro OBDII & a X on ecu while is conected to the car.there was a note on my last download saying that

The last Flashpro upload failed.
Failure information : code 0x05 Step 16 Address
0x0FFF00
Explanation: The ECU stopped responding while
reflashing. Check OBDII connector pins

.. PLEASE HELP I DONT NO WHAT TO DO THANKS

Gaby
Posts: 13
Joined: Fri Oct 12, 2018 6:41 pm

Re: Car is in recovery mode & cant conect with ECU [Flashpro]

Post by Gaby » Fri Oct 12, 2018 7:13 pm

When i connect the FP to the OBDI. it Flash one time every 5 seconds the power and datalog light

User avatar
Spunkster
Site Admin
Posts: 18059
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Car is in recovery mode & cant conect with ECU [Flashpro]

Post by Spunkster » Mon Oct 15, 2018 4:40 pm

With everything plugged in and the key in the on position, go to the Help menu and click on send information to Hondata support. Include a detailed description of the problem.

Gaby
Posts: 13
Joined: Fri Oct 12, 2018 6:41 pm

Re: Car is in recovery mode & cant conect with ECU [Flashpro]

Post by Gaby » Tue Oct 16, 2018 12:01 pm

ok i will Thanks

Gaby
Posts: 13
Joined: Fri Oct 12, 2018 6:41 pm

Re: Car is in recovery mode & cant conect with ECU [Flashpro]

Post by Gaby » Mon Nov 05, 2018 8:30 pm

So i just got a new ECU but i dont know if i re upload a basmap, the ecu will die again .. what could it be..

Gaby
Posts: 13
Joined: Fri Oct 12, 2018 6:41 pm

Re: Car is in recovery mode & cant conect with ECU [Flashpro]

Post by Gaby » Mon Nov 05, 2018 8:32 pm

I dont want to have a $700 hondata and cant use it

User avatar
Spunkster
Site Admin
Posts: 18059
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Car is in recovery mode & cant conect with ECU [Flashpro]

Post by Spunkster » Tue Nov 06, 2018 10:21 am

Was your FlashPro unlocked from the prior ECU?

Gaby
Posts: 13
Joined: Fri Oct 12, 2018 6:41 pm

Re: Car is in recovery mode & cant conect with ECU [Flashpro]

Post by Gaby » Tue Nov 06, 2018 6:35 pm

yes and the honda dealer put a stock tune on the new ecu.. im afraid to program a basemap again and kill the ecu again ..

Gaby
Posts: 13
Joined: Fri Oct 12, 2018 6:41 pm

Re: Car is in recovery mode & cant conect with ECU [Flashpro]

Post by Gaby » Tue Nov 06, 2018 6:38 pm

las upload that kill the ecu it show me this


The last Flashpro upload failed.
Failure information : code 0x05 Step 16 Address
0x0FFF00
Explanation: The ECU stopped responding while
reflashing. Check OBDII connector pins


(what did it mean )

User avatar
Spunkster
Site Admin
Posts: 18059
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Car is in recovery mode & cant conect with ECU [Flashpro]

Post by Spunkster » Wed Nov 07, 2018 10:49 am

That does not mean the ECU is dead, it just mans the upload failed and you should be able to re-upload to the ECU and it will be ok.

You must use the Hondata software to return the ECU to stock and then use the unlock function from the online menu to unlock it.

Gaby
Posts: 13
Joined: Fri Oct 12, 2018 6:41 pm

Re: Car is in recovery mode & cant conect with ECU [Flashpro]

Post by Gaby » Wed Nov 07, 2018 1:11 pm

well last time it show me that a couldn’t connect with the ECU of the car anymore.. talk with customer services and they told me to send the ecu and FP.. they told me it was the ecu.. so got a new one and im afraid to upload a new calibration

Gaby
Posts: 13
Joined: Fri Oct 12, 2018 6:41 pm

Re: Car is in recovery mode & cant conect with ECU [Flashpro]

Post by Gaby » Wed Nov 07, 2018 3:32 pm

hondata already unlock my Fp.. a week ago

User avatar
Spunkster
Site Admin
Posts: 18059
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Car is in recovery mode & cant conect with ECU [Flashpro]

Post by Spunkster » Wed Nov 07, 2018 3:37 pm

From Help, About, what is the version of software you are using?

Gaby
Posts: 13
Joined: Fri Oct 12, 2018 6:41 pm

Re: Car is in recovery mode & cant conect with ECU [Flashpro]

Post by Gaby » Wed Nov 07, 2018 7:29 pm

in runing now 3.1.6.0

when that happend i was on 3.1.1.0

User avatar
Spunkster
Site Admin
Posts: 18059
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Car is in recovery mode & cant conect with ECU [Flashpro]

Post by Spunkster » Thu Nov 08, 2018 10:03 am

It should be perfectly ok to us the FlashPro with the new ECU then.

Post Reply