Page 1 of 2

Car is in recovery mode & cant conect with ECU [Flashpro]

Posted: Fri Oct 12, 2018 7:04 pm
by Gaby
So my car was working fine & i decide to program a diferent calibration, so after i programed my Car dont start and cant conect with the ECU of the car. so that means that i cant do nothing about it. id check all fuses and disconect the battery and still in recovery mode. when i conect flashpro with the computer there is a check mark on Driver flashpro OBDII & a X on ecu while is conected to the car.there was a note on my last download saying that

The last Flashpro upload failed.
Failure information : code 0x05 Step 16 Address
0x0FFF00
Explanation: The ECU stopped responding while
reflashing. Check OBDII connector pins

.. PLEASE HELP I DONT NO WHAT TO DO THANKS

Re: Car is in recovery mode & cant conect with ECU [Flashpro]

Posted: Fri Oct 12, 2018 7:13 pm
by Gaby
When i connect the FP to the OBDI. it Flash one time every 5 seconds the power and datalog light

Re: Car is in recovery mode & cant conect with ECU [Flashpro]

Posted: Mon Oct 15, 2018 4:40 pm
by Spunkster
With everything plugged in and the key in the on position, go to the Help menu and click on send information to Hondata support. Include a detailed description of the problem.

Re: Car is in recovery mode & cant conect with ECU [Flashpro]

Posted: Tue Oct 16, 2018 12:01 pm
by Gaby
ok i will Thanks

Re: Car is in recovery mode & cant conect with ECU [Flashpro]

Posted: Mon Nov 05, 2018 8:30 pm
by Gaby
So i just got a new ECU but i dont know if i re upload a basmap, the ecu will die again .. what could it be..

Re: Car is in recovery mode & cant conect with ECU [Flashpro]

Posted: Mon Nov 05, 2018 8:32 pm
by Gaby
I dont want to have a $700 hondata and cant use it

Re: Car is in recovery mode & cant conect with ECU [Flashpro]

Posted: Tue Nov 06, 2018 10:21 am
by Spunkster
Was your FlashPro unlocked from the prior ECU?

Re: Car is in recovery mode & cant conect with ECU [Flashpro]

Posted: Tue Nov 06, 2018 6:35 pm
by Gaby
yes and the honda dealer put a stock tune on the new ecu.. im afraid to program a basemap again and kill the ecu again ..

Re: Car is in recovery mode & cant conect with ECU [Flashpro]

Posted: Tue Nov 06, 2018 6:38 pm
by Gaby
las upload that kill the ecu it show me this


The last Flashpro upload failed.
Failure information : code 0x05 Step 16 Address
0x0FFF00
Explanation: The ECU stopped responding while
reflashing. Check OBDII connector pins


(what did it mean )

Re: Car is in recovery mode & cant conect with ECU [Flashpro]

Posted: Wed Nov 07, 2018 10:49 am
by Spunkster
That does not mean the ECU is dead, it just mans the upload failed and you should be able to re-upload to the ECU and it will be ok.

You must use the Hondata software to return the ECU to stock and then use the unlock function from the online menu to unlock it.

Re: Car is in recovery mode & cant conect with ECU [Flashpro]

Posted: Wed Nov 07, 2018 1:11 pm
by Gaby
well last time it show me that a couldn’t connect with the ECU of the car anymore.. talk with customer services and they told me to send the ecu and FP.. they told me it was the ecu.. so got a new one and im afraid to upload a new calibration

Re: Car is in recovery mode & cant conect with ECU [Flashpro]

Posted: Wed Nov 07, 2018 3:32 pm
by Gaby
hondata already unlock my Fp.. a week ago

Re: Car is in recovery mode & cant conect with ECU [Flashpro]

Posted: Wed Nov 07, 2018 3:37 pm
by Spunkster
From Help, About, what is the version of software you are using?

Re: Car is in recovery mode & cant conect with ECU [Flashpro]

Posted: Wed Nov 07, 2018 7:29 pm
by Gaby
in runing now 3.1.6.0

when that happend i was on 3.1.1.0

Re: Car is in recovery mode & cant conect with ECU [Flashpro]

Posted: Thu Nov 08, 2018 10:03 am
by Spunkster
It should be perfectly ok to us the FlashPro with the new ECU then.