2007 Civic Turbo Knock control 100%

FlashPro questions & answers specific to the 2006-2011 Americas Civic Si
Post Reply
RebelR18
Posts: 4
Joined: Thu Apr 25, 2019 6:53 am

2007 Civic Turbo Knock control 100%

Post by RebelR18 »

I have a Boosted Civic R18 that has been dyno tuned and the AFR is spot on at 11.5 However i noticed in the flashpro data logs that as soon as i turn the engine on the knock control is at 100%. From what ive read online about how the knock system works on these cars is that at 0 % knock control the ecu would assume 95 octane and 100% would be 85. I only run 93 octane in the tank, so if i have 93 octane why is the ECU off the bat jumping to 100% knock control and what can i adjust to bring it down? I dont believe the engine is actually knocking as i have not heard any pining nor have i seen the k retard go past 0. The car pulls and drives fine and everything is in the green on flashpro except the knock control.
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: 2007 Civic Turbo Knock control 100%

Post by Spunkster »

It is hard to speculate without looking at the calibration and Datalog. You can post them here.
RebelR18
Posts: 4
Joined: Thu Apr 25, 2019 6:53 am

Re: 2007 Civic Turbo Knock control 100%

Post by RebelR18 »

Sure, Here is the tune and 2 datalogs from driving this morning. Thanks for the quick response
Attachments
Datalog-190425-001.fpdl
(447.56 KiB) Downloaded 146 times
Datalog-190425-000.fpdl
(45.67 KiB) Downloaded 127 times
222 HP_R18 tune.fpcal
(10.73 KiB) Downloaded 131 times
Typersam
Posts: 34
Joined: Sun Mar 31, 2019 2:46 pm

Re: 2007 Civic Turbo Knock control 100%

Post by Typersam »

Think I've seen this build, done by tdi north right?
Post Reply