Hondata

Posted: **Tue Jun 10, 2014 10:30 am**

Hi!
Just want to make sure i got this right, to avoid causing any unnecessary damage :)
Is this the correct way to connect it? (as you might understand, i want to be able to read the wideband from the flashpro software)
Thanks!

: SM-AFR_ECU.jpg (61.13 KiB) Viewed 3894 times

Posted: **Tue Jun 10, 2014 10:54 am**

The wire going to the ECU looks correct.

Posted: **Wed Jun 11, 2014 6:41 am**

Hi,
Thanks for your reply.
Can you please confirm that B29 (EGRL) is the correct PIN for me to use?
I read in an (old) post in another forum that this does not apply to the European models, and that i have to use either the A23 (ELD) or A33 (ECT2)
Thanks!

Posted: **Wed Jun 11, 2014 9:24 am**

You should be able to use any of the 3 inputs listed in the software. You may want to confirm with CPL Racing in the UK as they are more familiar with these ECUs as we do not have these in the US.

Hondata

Connecting PLX SM-AFR Gen3 (with DM-6)

Connecting PLX SM-AFR Gen3 (with DM-6)

Re: Connecting PLX SM-AFR Gen3 (with DM-6)

Re: Connecting PLX SM-AFR Gen3 (with DM-6)

Re: Connecting PLX SM-AFR Gen3 (with DM-6)