Hondata

Posted: **Thu Jul 02, 2009 6:47 am**

I have a problem with cruise control on 6th gear, it doesn't work. I tried Group N reflash and "MAP based, race header, highflow cat, stock catback." for FN2 calibrations. It works on 5th gear fine, but on 6th it works only when rpm's are at 2k-3k.

Posted: **Thu Jul 02, 2009 10:28 am**

We are looking into this. Can you please provide a datalog showing the problem?

Posted: **Thu Jul 02, 2009 12:26 pm**

Spunkster wrote:We are looking into this. Can you please provide a datalog showing the problem?

Cruise control only works on MAP calibrations but not on 6th gear, on MAF (Groupe N reflash) I can't even switch it on. I'll make datalog tomorow.

Posted: **Thu Jul 02, 2009 5:04 pm**

Do you have a Type R GT? What is the ECU code number?

Posted: **Thu Jul 02, 2009 10:16 pm**

Spunkster wrote:Do you have a Type R GT? What is the ECU code number?

Yes, Type-R GT. ECU code number: RSP-E03.
With MAF Groupe N reflash cruise control doesn't work at all.
With MAP raceheader tuned, when I mark "Cruise control enabled" in "Misc" it works, but not on 6th gear.

On which calibration I should datalog?

Posted: **Thu Jul 02, 2009 11:51 pm**

I've made two datalogs with "Group N Reflash" and "MAP based, race header, highflow cat, stock catback" calibrations.
Could you advice which calibration is better to use with bolts on like header, catback, hondata heat gasket? It seems that MAP based runs better...

Posted: **Sun Jul 05, 2009 8:36 am**

walter wrote:
Spunkster wrote:Do you have a Type R GT? What is the ECU code number?
Yes, Type-R GT. ECU code number: RSP-E03.
With MAF Groupe N reflash cruise control doesn't work at all.
With MAP raceheader tuned, when I mark "Cruise control enabled" in "Misc" it works, but not on 6th gear.

On which calibration I should datalog?

same problem. :(

Posted: **Mon Jul 06, 2009 12:41 am**

I have the same problem, the automotive cruise control don't work at any gear..

i only reflash the ECU with Hondata Group N Calibration

can you help ?

Posted: **Mon Jul 06, 2009 1:26 pm**

We are still looking into this. It appears to only be an issue with the Type R GT since it uses a different ECU than the Base Type R. This was not something we were made aware of until now.

Posted: **Mon Jul 06, 2009 1:37 pm**

hondata please note that I have a FN2 GT (the only that have cruise control) and with my reflash ECU hondata group N the cruise control works fine. I have this ECU for almost a year

now with the OEM ECU with the flashpro the cruise control dosen't work.

Posted: **Mon Jul 06, 2009 11:47 pm**

thats right, with the Hondata Reflash ECU the Cruisecontrol works fine but with the OEM ECU and the Hondata Group N Calibration it doesnt work.

Please Hondata fix it soon !

Thanks

Posted: **Tue Jul 07, 2009 5:25 am**

I'm looking forward for this fix, too.

Posted: **Tue Jul 07, 2009 12:19 pm**

I'm waiting this fix too...

Posted: **Tue Jul 07, 2009 12:35 pm**

I think, everybody is waiting for this fix :D... Because you can't rest when driving on motorways :)

Posted: **Tue Jul 07, 2009 12:51 pm**

Are you using the stock ECU or the Group-N ECU with the FlashPro?

Hondata

FlashPro on FN2 Cruise Control problem

FlashPro on FN2 Cruise Control problem