ISSUE #1
Last night I updated my laptop with the newest 1.1.6.1 bata version, it asked me to update the FP's fw to 22 as normal, but now when I do a datalog using the FP alone by passing the Datalog button it shows blank when I replay it in the FP software on my laptop. I tried the official release and the same thing happens.
ISSUE #2
And also with the offical and the beta after downloading the logs from FP some are compressed and some are not. a 40mins drive = 7MB at times and other times it's like 5-600kb's not even a mb.
Somethings to look into!
-V1.1.5.6 and also V1.1.6.1 beta
-2008 Si
-Serial number, not sure if I should post it here
-Cali is your CT-E Stage2 MAP
When posting a FlashPro problem with your vehicle, please include:
- serial number of your FlashPro
- FlashPro Manager version (not 'the latest')
- the calibration (as an attachment)
- a datalog of a problem (as an attachment)
- what sort of vehicle you have
- what sort of ECU you are using
- anything about the car which has been modified from stock which may affect the ECU (don't include what sort of rims you have nor stereo etc).
- a specific description of the problem
Most of the recent posts leave out information pertinent to solving the problem.
Dataloging error with 1.1.6.1 beta
Dataloging error with 1.1.6.1 beta
- Attachments
-
- Coldstart - alittle sputtering.fpdl
- (1.94 KiB) Downloaded 177 times