Knock control for Flashpro Manager 1.1.6.2

FlashPro Manager software
Post Reply
engjoo
Posts: 102
Joined: Wed Mar 10, 2010 1:00 am

Knock control for Flashpro Manager 1.1.6.2

Post by engjoo »

I see that the knock control has been change from "knock sensitivity" to "Knock Ignition limits".

How are they related ? Is there a direct correlation ?

How will it affect cals that was done in previous FPM ? Do I reload the cal in 1.1.6.2, save it and upload to FP again for subsequent upload to ECU ?
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Post by Hondata »

Hondata
civicRSA
Posts: 132
Joined: Thu Nov 12, 2009 11:29 am
Location: South Africa
Contact:

Post by civicRSA »

I have some questions on the new knock limit tables. For example in boost columns 11-16 the knock limit high is set to 1 does this mean that the high limit is 1 degree over actual ignition table values?
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

In the FlashPro manager software go to Help, then type "knock control tables" into the search tab and read the new help file about how these tables work.
Post Reply