Hondata

Hondata User Forum
It is currently Wed May 22, 2013 3:16 am

View unanswered posts | View active topics


Board index » FlashPro » FlashPro Manager

All times are UTC - 8 hours [ DST ]



Post new topic This topic is locked, you cannot edit posts or make further replies.  Page 1 of 2
  [ 21 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
jdmvtec7
PostPosted: Fri Nov 25, 2011 3:06 pm 
Offline

Joined: Wed Nov 23, 2011 12:04 pm
Posts: 8
I just got flashpro for my car and I went to go lock it to my ecu, but I get this message in flashpro manager that says:

The calibration in this ECU (Civic Si 2006 US/Canada - Stock) does not match the ECU type (FG2/FA5 Civic Si 2007-2011 US/Canada). If this ECU is returned to stock, then the existing calibration will be lost. Do you want to continue?

What does this mean?
Top
 Profile  
 
Hondata
PostPosted: Fri Nov 25, 2011 4:28 pm 
Offline
Site Admin
User avatar

Joined: Thu Aug 15, 2002 12:13 pm
Posts: 5283
Location: Torrance, Ca
Can you tell us what vehicle you have and the ecu part number?

_________________
Hondata
Top
 Profile  
 
jdmvtec7
PostPosted: Fri Nov 25, 2011 5:09 pm 
Offline

Joined: Wed Nov 23, 2011 12:04 pm
Posts: 8
Its a 2007 civic si, coupe.

ecu: 37820-RRB-A12
4744-104199
Top
 Profile  
 
Hondata
PostPosted: Sun Nov 27, 2011 9:00 am 
Offline
Site Admin
User avatar

Joined: Thu Aug 15, 2002 12:13 pm
Posts: 5283
Location: Torrance, Ca
It is a 2006 calibration in a 2007 ECU. Do you have VSA?

_________________
Hondata
Top
 Profile  
 
jdmvtec7
PostPosted: Sun Nov 27, 2011 1:19 pm 
Offline

Joined: Wed Nov 23, 2011 12:04 pm
Posts: 8
Yes i have VSA. How can I have a 2006 calib in a 2007. What does it mean?
Top
 Profile  
 
Hondata
PostPosted: Mon Nov 28, 2011 9:42 am 
Offline
Site Admin
User avatar

Joined: Thu Aug 15, 2002 12:13 pm
Posts: 5283
Location: Torrance, Ca
Can you use the 'send support information to Hondata' function?

_________________
Hondata
Top
 Profile  
 
jdmvtec7
PostPosted: Mon Nov 28, 2011 11:12 am 
Offline

Joined: Wed Nov 23, 2011 12:04 pm
Posts: 8
I'm not sure. How do I do that?
Top
 Profile  
 
Hondata
PostPosted: Mon Nov 28, 2011 11:30 am 
Offline
Site Admin
User avatar

Joined: Thu Aug 15, 2002 12:13 pm
Posts: 5283
Location: Torrance, Ca
Plug the FlashPro into your vehicle, then into the laptop. Select 'Send Information to Hondata support' from the help menu.

If you don't have a laptop or internet connection near your vehicle then you can plug the FlashPro into the vehicle, switch on the ignition for a couple of seconds so that the FlashPro records the ECU details, then take the FlashPro inside and use any computer with an internet connection and FlashProManager software.

_________________
Hondata
Top
 Profile  
 
jdmvtec7
PostPosted: Mon Nov 28, 2011 1:09 pm 
Offline

Joined: Wed Nov 23, 2011 12:04 pm
Posts: 8
Ok I will do that later today. If i do it by the second method u said ( plugging flashpro into car and turning car on), does flashpro need to be locked to my vehicle? Because its currently NOT locked to my car yet. Also, do u mean actually turn on the car so its running? or just turn the key to the on positions (position II)?
Top
 Profile  
 
Hondata
PostPosted: Mon Nov 28, 2011 1:42 pm 
Offline
Site Admin
User avatar

Joined: Thu Aug 15, 2002 12:13 pm
Posts: 5283
Location: Torrance, Ca
No, the FlashPro does not need to be locked to the vehicle. The key should be turned to the on position, but the car does not need to be started.

_________________
Hondata
Top
 Profile  
 
jdmvtec7
PostPosted: Mon Nov 28, 2011 4:17 pm 
Offline

Joined: Wed Nov 23, 2011 12:04 pm
Posts: 8
I just sent the info to Hondata Support through flashpro manager. Let me know that you got it!
Top
 Profile  
 
Hondata
PostPosted: Mon Nov 28, 2011 5:18 pm 
Offline
Site Admin
User avatar

Joined: Thu Aug 15, 2002 12:13 pm
Posts: 5283
Location: Torrance, Ca
Ok, got the information. The problem is that the ECU has been reflashed by FlashPro before. Don't worry about the return to stock warning - go ahead and lock the FlashPro to the ECU and reflash it. Also, I suggest using FlashProManager 1.1.9.6 (latest version).

_________________
Hondata
Top
 Profile  
 
jdmvtec7
PostPosted: Mon Nov 28, 2011 11:13 pm 
Offline

Joined: Wed Nov 23, 2011 12:04 pm
Posts: 8
So, I wont be able to lock the flashpro to my car without it flashing my ecu to stock? I'm not ready to upload a new tune yet, but I wanted to just lock my flashpro and be able to adjust a few things on the existing tune. I guess I cant do that?
Top
 Profile  
 
ALL M0T0R
PostPosted: Sat Mar 03, 2012 2:44 pm 
Offline

Joined: Sat Mar 03, 2012 2:42 pm
Posts: 11
Location: Baton rouge,LA
I have a customer's car i'm currently trying to tune right now..

Its giving me the same error code, this is on a 2011 Civic SI however. The FP will not lock to the car, however the datalog and everything works fine.. i've tried just about everything i could think of, and the FP will not lock, i've not had this error before either.

Car is also, brand new, car was bought March 12th 2011, FlashPRO was bought just yesterday here at lightning.. Really upsetting right now..

_________________
DDTECH

DDTECHCAMS.com
Top
 Profile  
 
Hondata
PostPosted: Sat Mar 03, 2012 3:43 pm 
Offline
Site Admin
User avatar

Joined: Thu Aug 15, 2002 12:13 pm
Posts: 5283
Location: Torrance, Ca
Update to the latest version of the software. Currently the latest version is 1.2.5

_________________
Hondata
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic This topic is locked, you cannot edit posts or make further replies.  Page 1 of 2
  [ 21 posts ]  Go to page 1, 2  Next

Board index » FlashPro » FlashPro Manager

All times are UTC - 8 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 2 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group