FlashProManager V1.8.3 beta (Bluetooth)

FlashPro Manager software
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: FlashProManager V1.8.0 beta (Bluetooth)

Post by Hondata »

IcEMoCHa wrote:I'm having the non bluetooth version of the flashpro. The latest firmware seemed to have fixed the button issue.

But now the flashpro doesn't turn on/turn off itself (no lights) when there is no activity and cannot datalog/program.

I have to unplug the obd and replug it in before it works.
What procedure are you going through to give the behavior?
Hondata
IcEMoCHa
Posts: 61
Joined: Fri Oct 01, 2010 8:00 am

Re: FlashProManager V1.8.0 beta (Bluetooth)

Post by IcEMoCHa »

My flashpro is left in car from previous datalogging session. Reached destination, turned off engine.

Later when I turned key to ignition position the flashpro power light comes on for a sec then off. After that, the flashpro stays off even after engine is started.
terenceng
Posts: 42
Joined: Thu Jan 14, 2010 11:19 am

Re: FlashProManager V1.8.0 beta (Bluetooth)

Post by terenceng »

IcEMoCHa wrote:My flashpro is left in car from previous datalogging session. Reached destination, turned off engine.

Later when I turned key to ignition position the flashpro power light comes on for a sec then off. After that, the flashpro stays off even after engine is started.
excatly the same problem as one of my customers

however the flashpro is back to normal after a while.

hopefully it is just a bug.

thank you
soxfan143
Posts: 216
Joined: Mon Nov 12, 2007 5:09 pm
Location: lynnfield MA

Re: FlashProManager V1.8.0 beta (Bluetooth)

Post by soxfan143 »

IcEMoCHa wrote:My flashpro is left in car from previous datalogging session. Reached destination, turned off engine.

Later when I turned key to ignition position the flashpro power light comes on for a sec then off. After that, the flashpro stays off even after engine is started.
I'm having the same issue. I have to unplug the DLC connector every time I Shut the car off.
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: FlashProManager V1.8.0 beta (Bluetooth)

Post by Hondata »

Can you check that you have firmware 63, not 62?
Hondata
IcEMoCHa
Posts: 61
Joined: Fri Oct 01, 2010 8:00 am

Re: FlashProManager V1.8.0 beta (Bluetooth)

Post by IcEMoCHa »

Hondata wrote:Can you check that you have firmware 63, not 62?
Mine is 63
soxfan143
Posts: 216
Joined: Mon Nov 12, 2007 5:09 pm
Location: lynnfield MA

Re: FlashProManager V1.8.0 beta (Bluetooth)

Post by soxfan143 »

Hondata wrote:Can you check that you have firmware 63, not 62?
I am also on 63
mabo
Posts: 64
Joined: Sun Mar 18, 2012 2:21 pm

Re: FlashProManager V1.8.1 beta (Bluetooth)

Post by mabo »

Damn , i had a drag today and my flashpro also been screwed with that update. It lives its own life now , turns off all the time , i cant catch it to be turned on to make a datalog or upload a cal... have to play with turn off on ignition and plug\unplug it to DLX . Fix it !
mabo
Posts: 64
Joined: Sun Mar 18, 2012 2:21 pm

Re: FlashProManager V1.8.1 beta (Bluetooth)

Post by mabo »

Forgot to add, 1.8.1 FPM , 63 FW .
VitViper
Posts: 273
Joined: Thu Aug 27, 2009 10:38 pm

Re: FlashProManager V1.8.1 beta (Bluetooth)

Post by VitViper »

The option to disable the fuel economy alternator control on the ILX calibrations is kind of a nuisance... I have customers in cold climates that are having trouble due to the battery drainage from this stupid "feature" Honda added lol
User avatar
R-12914
Posts: 349
Joined: Sun Dec 01, 2013 12:13 pm
Location: Germany/Bavaria

Re: FlashProManager V1.8.0 beta (Bluetooth)

Post by R-12914 »

IcEMoCHa wrote:My flashpro is left in car from previous datalogging session. Reached destination, turned off engine.

Later when I turned key to ignition position the flashpro power light comes on for a sec then off. After that, the flashpro stays off even after engine is started.
I have also the same problem with my non bluetooth Flashpro on version 1.8.1 beta with FW version 63.
Please try and fix this problem!!!
2008 Honda Civic TypeR FN2
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185
romeochris
Posts: 25
Joined: Wed Mar 09, 2011 9:17 am

Re: FlashProManager V1.8.0 beta (Bluetooth)

Post by romeochris »

terenceng wrote:
IcEMoCHa wrote:My flashpro is left in car from previous datalogging session. Reached destination, turned off engine.

Later when I turned key to ignition position the flashpro power light comes on for a sec then off. After that, the flashpro stays off even after engine is started.
excatly the same problem as one of my customers

however the flashpro is back to normal after a while.

hopefully it is just a bug.

thank you
Just updated the firmware 63 into my FP and tried on my JDM FD2, problem still happen.
I have to plug the FP AFTER I switched to ON position, otherwise the FP will not turn on. Mine is non-BT version FP. Thx!
sass
Posts: 110
Joined: Mon Oct 06, 2008 5:07 am
Location: Evropa-Estonia-Tallinn

Re: FlashProManager V1.8.2 beta (Bluetooth)

Post by sass »

Hondata ver. 1.6.3 fuel level in racing calibration was working fine on dash of FN2. In ver 1.8.1 and 1.8.2 fuel level fails + - 15-20
Cr-v RD8+K24A2turbo+Kpro V4 prb+NPR3/6Speed+ТС+ HFS4 v3.2.
DynoWheel = 472kW / 589 N.m
HRX One Mile Challenge = Max Speed 282km
Known as Sniper
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: FlashProManager V1.8.2 beta (Bluetooth)

Post by Hondata »

sass wrote:Hondata ver. 1.6.3 fuel level in racing calibration was working fine on dash of FN2. In ver 1.8.1 and 1.8.2 fuel level fails + - 15-20
We have not changed the race calibration code for the last year or so. You should be aware that this is a 'race' calibration, and the fuel level / economy will not work correctly on the FN2. Use a FN2 calibration with Speed/Density tables enabled.
Hondata
VitViper
Posts: 273
Joined: Thu Aug 27, 2009 10:38 pm

Re: FlashProManager V1.8.2 beta (Bluetooth)

Post by VitViper »

We need P0128 disable on the 06-11 Civic Si calibrations -- I have customers throwing that code with low temp thermos (and my car has a low temp as well).
Locked