FlashPro Requests
Re: FlashPro Requests
{2018+} Honda Accord 2.0T auto 10th gen
i would like some more mod support right now there's only flex fuel. though you can install race downpipes, less restricting/bigger exhaust systems, cold air intakes, and the ctr turbo upgrade thats already discussed on your website.
i would like some more mod support right now there's only flex fuel. though you can install race downpipes, less restricting/bigger exhaust systems, cold air intakes, and the ctr turbo upgrade thats already discussed on your website.
Re: FlashPro Requests
Hi i would like to buy my dad a flashpro for his 2019 cr-v 1.5t 6mt is there any chance these will be supported in the future? I have a flashpro myself for my fk8 so if i needed to pull any info from the cr-v i could use my one, thanx.
Jeremy.
Jeremy.
Re: FlashPro Requests
I do not believe that there is a manual 2019 CRV.
Re: FlashPro Requests
Yes there is a manual cr-v 6mt
Re: FlashPro Requests
In europe its available as a cvt or 6mt, Any chance the cvt version would work on it?
Re: FlashPro Requests
If possible, please add following preset for all Civic 1.5T (206+) calibrations as part of modification:
- Preset for throttle response sensitivity ranging from normal, moderate, and high.
- Preset for better turbo response and turbo spool ranging from stock, improve 1, & improve 2.
- Preset for turbo boost ramp ranging from stock, improve 1, & improve 2.
-
- Posts: 3
- Joined: Sat Jul 18, 2020 8:40 am
Re: FlashPro Requests
As a learning experience, I want to compare different calibrations
provided with Flashpro for the Civic Type R 2017+. I would like to
do this by printing out all of the calibration values so that I can
see everything at once, and mark differences up on paper.
Is there a facility in the software that will print out the entire
contents of the calibration?
If not, is it possible to decode the fpcal files and print them out
with tooling of my own?
provided with Flashpro for the Civic Type R 2017+. I would like to
do this by printing out all of the calibration values so that I can
see everything at once, and mark differences up on paper.
Is there a facility in the software that will print out the entire
contents of the calibration?
If not, is it possible to decode the fpcal files and print them out
with tooling of my own?
Re: FlashPro Requests
Would the crv 1.5t cvt calibration work with the crv 1.5t 6mt? Or would the ecu have some of the cvt stuff conflicting with the calibration
Re: FlashPro Requests
This is not supported at this time.
-
- Posts: 3
- Joined: Sat Jul 18, 2020 8:40 am
Re: FlashPro Requests
Any manual transmissions CRV's
-
- Posts: 15
- Joined: Sun May 17, 2020 6:33 am
Re: FlashPro Requests
Instant jailbreak for 2020 FK8 !
Re: FlashPro Requests
Is it possible to disable hill start assist from the ECU? I had it on my Subaru and was able to disable it. If it is possible, consider it a request from me!
Re: FlashPro Requests
Include the FileName uploaded in Datalog
Example: Steps...
Datalog saved with Variable always incrementing.
Example: instead of datalog001, the file saved always use Internal Variable that Increments, file could be dat0003001, were 0003 is the internal variable, always incrementing.
With this way we always can see the diference between two datalogs with the same name and have a timeline.
Example: Steps...
- File uploaded A.fpcal;
- Save Datalog 001, 002, 003;
- File Upload B.fpcal;
- Save Datalog 004, 005, 006;
- Delete All Logs
- Save Datalog 001, 002, 003;
Datalog saved with Variable always incrementing.
Example: instead of datalog001, the file saved always use Internal Variable that Increments, file could be dat0003001, were 0003 is the internal variable, always incrementing.
With this way we always can see the diference between two datalogs with the same name and have a timeline.