FlashProManager v2.2.8
Re: FlashProManager v1.9.7
The upload is working (you can check this by plugging the FlashPro back into a PC). You need to power cycle the ignition after the upload has finished.
Hondata
Re: FlashProManager v1.9.7
I do that. I've uploaded 94 calibrations to my Si. No problems until I updated to 1.9.7 and firmware 68.Hondata wrote:The upload is working (you can check this by plugging the FlashPro back into a PC). You need to power cycle the ignition after the upload has finished.
I'll try 1.9.8 and see if the issue persists.
Re: FlashProManager v1.9.8
@Hondata
This is a long time coming... can we please get the ability to disable all the EVAP codes in the 06-11 AFM calibrations? Getting a lot of cars popping p0498 and such when they get modded (and well... my car doesn't have an evap system, lol).
This is a long time coming... can we please get the ability to disable all the EVAP codes in the 06-11 AFM calibrations? Getting a lot of cars popping p0498 and such when they get modded (and well... my car doesn't have an evap system, lol).
-
- Posts: 3
- Joined: Wed Oct 15, 2014 7:46 pm
Re: FlashProManager v2.0.0
how do i update my version if my pc is windows 64bits???!! im using the 1.93 version
Re: FlashProManager v2.0.0
FlashProManager works on both 32 and 64 bit versions of windows. What problem are you having?
Hondata
-
- Posts: 3
- Joined: Wed Oct 15, 2014 7:46 pm
Re: FlashProManager v2.0.0
when i accept the update it try to start the download. sometimes it says that the 'files are corrupted.' and sometimes it says that this is not a win32 program...
-
- Posts: 81
- Joined: Mon Oct 14, 2013 6:14 am
Re: FlashProManager v2.0.0
Download from the link in the first post of this thread.
Re: FlashProManager v2.0.0
Normally this is because your anti-virus is deleting the update file.matheusorlandini wrote:when i accept the update it try to start the download. sometimes it says that the 'files are corrupted.' and sometimes it says that this is not a win32 program...
Hondata
Re: FlashProManager v2.0.0
I updated to version 2.0.0.0 and I am getting error message "The last Flashpro upload failed. Failure information : Code 0x02 Step 3 Address 0x000000". Please advise.
Re: FlashProManager v2.0.0
Are you uploading using a laptop or with the button on the FlashPro?
Does FlashProManager show the ECU with a green tick?
I would reset the FlashPro by unplugging from the car and the USB, then upload the calibration to the FlashPro again.
Does FlashProManager show the ECU with a green tick?
I would reset the FlashPro by unplugging from the car and the USB, then upload the calibration to the FlashPro again.
Hondata
Re: FlashProManager v2.0.0
Laptop. I removed the software and reinstalled. This solved the problem.
Re: FlashProManager v2.0.0
I guess I should have put this in here -> http://www.hondata.com/forum/viewtopic. ... 94&p=79857
-
- Posts: 81
- Joined: Mon Oct 14, 2013 6:14 am
Re: FlashProManager v2.0.0
FlashPro help file seems to be down, http://www.hondata.com/help/flashpro/index.html goes to:
Error 404 - Not Found
The document you are looking for may have been removed or re-named. Please contact the web site owner for further assistance.
Error 404 - Not Found
The document you are looking for may have been removed or re-named. Please contact the web site owner for further assistance.
Re: FlashProManager v2.0.0
Thanks for the notification - the online help has now been fixed.
Hondata
Re: FlashProManager v2.0.0
Today, I tried to mapping a jdm FD2 civic type r with flashpro manager v2.0.0. Everything works right when driving in closed loop but when you full throttle car don't turn to open loop. Short term trim be 0% but it looks like engine runs in open loop because I added 10% fuel but air fuel ratio doesn't changed (I turn on the live tuning and it's working on closed loop). I forgot to record a datalog.
On "FD2 Hondata Type R Reflash" calibration "Use Map to determine WOT" is not ticked, I think that it should be ticked because of the FD2 using the map sensor. Am I wrong?
On "FD2 Hondata Type R Reflash" calibration "Use Map to determine WOT" is not ticked, I think that it should be ticked because of the FD2 using the map sensor. Am I wrong?