S.Trim and WOT tables

FlashPro Manager software
Post Reply
Scuderia
Posts: 14
Joined: Mon Mar 23, 2015 12:44 am

S.Trim and WOT tables

Post by Scuderia » Mon Mar 23, 2015 12:53 am

Hello I'm trying to understand WOT tables. What would happen to the S.Trim if the WOT tables were set to above 12.5 across the board? For example if they were set to 13.34 across the board, would the S.Trim target 14.7 or 13.34?

I dataloged a 3rd gear pull on the factory tune, and noticed it was trimming fuel from 2-4k RPM, despite being at WOT. It was targeting 13-ish, not 14.7 though.

Thanks.

User avatar
Spunkster
Site Admin
Posts: 17940
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: S.Trim and WOT tables

Post by Spunkster » Mon Mar 23, 2015 10:52 am

Post your datalog and calibration.

User avatar
Hondata
Site Admin
Posts: 8760
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: S.Trim and WOT tables

Post by Hondata » Tue Mar 24, 2015 10:46 am

Please do not set the WOT compensation tables above 12.5:1. The ECU behavior can be unpredictable.
Hondata

DatLife84
Posts: 22
Joined: Tue Feb 25, 2014 6:18 pm

Re: S.Trim and WOT tables

Post by DatLife84 » Thu May 28, 2015 5:00 pm

Are you guys talking about the WOT compensation tables for the low cam or high cam?

User avatar
Spunkster
Site Admin
Posts: 17940
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: S.Trim and WOT tables

Post by Spunkster » Fri May 29, 2015 9:10 am

both

Post Reply