Throttle body swaps

FlashPro Manager software
User avatar
Hondata
Site Admin
Posts: 8881
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Throttle body swaps

Post by Hondata »

The RSX/DC5 ECU does not have DBW. It only will work with a cable throttle.
Hondata

Bones126
Posts: 16
Joined: Thu Oct 04, 2018 2:09 am

Re: Throttle body swaps

Post by Bones126 »

Does anyone know anything about the spec of this new GENUINE HONDA J35Y RIDGELINE 78/70MM THROTTLE BODY CIVIC FN2 07-11
Looking to see if the power and resistance requirement are equal to the oe one for Euro fn2 TB

HONDA J35Y Ridgeline Throttle Body. This brand new 2019 Honda throttle body is an excellent upgrade over the FN2 OEM throttle body. It features a 12mm bigger (over OEM) bore - same as the original J37 but cheaper! You will need to port match the RSP and RRC inlet manifold to 70mm otherwise a bottle neck will occur. Complete with plastic T-piece as this throttle body features 1 less vacuum source. The ultimate DBW genuine Honda OEM throttle body. Part number: 16400-5J6-A01

User avatar
Hondata
Site Admin
Posts: 8881
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Throttle body swaps

Post by Hondata »

Same as the ZDX throttle body.
Hondata

Bones126
Posts: 16
Joined: Thu Oct 04, 2018 2:09 am

Re: Throttle body swaps

Post by Bones126 »

Hondata wrote:
Sun Jan 12, 2020 8:45 am
Same as the ZDX throttle body.
Thank you, so as per a previous post. I should be able to swap the motors over from my euro FN2 into this ZDX and hopefully have no issues.

Thank you for the support

Bones126
Posts: 16
Joined: Thu Oct 04, 2018 2:09 am

Re: Throttle body swaps

Post by Bones126 »

zaramatt wrote:
Sat Sep 29, 2018 9:58 pm
That is exactly what I did, never had a problem ran perfect.
Hi, I take it you swapped the motor out of your original TB and replaced it into the ZDX. Was it straight forward.

thank you for any help.

Post Reply