Fuel Injection restart RPM

FlashPro Manager software
Post Reply
teddytao18
Posts: 4
Joined: Wed Aug 10, 2016 6:02 pm

Fuel Injection restart RPM

Post by teddytao18 »

As I drove my reflashed Si, I noticed that there is a slight acceleration at about 1300 rpm, when I was braking or coasting in gear. I am not comfortable with it, and want to lower it to 1000 so that I can spend more time in gear without shifting to neutral. Anyone knows what I need to change?
pepperdanky
Posts: 81
Joined: Mon Oct 14, 2013 6:14 am

Re: Fuel Injection restart RPM

Post by pepperdanky »

See "Injector Overrun Cutoff" here: https://www.hondata.com/help/flashpro/t ... meters.htm

The engine may stall when coming to idle if you lower the recover rpm below 1300.
teddytao18
Posts: 4
Joined: Wed Aug 10, 2016 6:02 pm

Re: Fuel Injection restart RPM

Post by teddytao18 »

I tried that, it didn't seem to work. I still felt the acceleration at about 1300 rpm, and the power monitor in the imid confirmed it.
pepperdanky
Posts: 81
Joined: Mon Oct 14, 2013 6:14 am

Re: Fuel Injection restart RPM

Post by pepperdanky »

Then 1300 rpm may be the lower limit of what the ECU will allow.
Post Reply