FlashProManager 2.6.7.0 & 2.6.8.0

FlashPro Manager software
User avatar
R-12914
Posts: 348
Joined: Sun Dec 01, 2013 12:13 pm
Location: Germany/Bavaria

Re: FlashProManager 2.6.7.0 & 2.6.8.0

Post by R-12914 » Fri May 12, 2017 3:41 am

typer86 wrote:
Fri May 12, 2017 1:17 am
Today updated the firmware from 2.6.6.0 to 2.6.8.0

Issue:
The orange LED is very dark after the update! It is hard to see if the log is started or not.
It look like a little "glow" like a old LED.

Please check it.
My Flashpro is ~4 years old without BT
Same here!
2008 Honda Civic TypeR FN2
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E03
Flashpro: FP-SI-INT-21153
Software: 3.4.5.0
Firmware: 168

fizeks
Posts: 2
Joined: Mon Feb 27, 2017 3:03 pm

Re: FlashProManager 2.6.7.0 & 2.6.8.0

Post by fizeks » Mon May 15, 2017 1:08 pm

R-12914 wrote:
Fri May 12, 2017 3:41 am
typer86 wrote:
Fri May 12, 2017 1:17 am
Today updated the firmware from 2.6.6.0 to 2.6.8.0

Issue:
The orange LED is very dark after the update! It is hard to see if the log is started or not.
It look like a little "glow" like a old LED.

Please check it.
My Flashpro is ~4 years old without BT
Same here!
can confirm the orange LED is very dark as well ever since the 2.6.8.0 update. could not see if i was datalogging or not. My flashpro is also without BT if that makes a difference.

fizeks
Posts: 2
Joined: Mon Feb 27, 2017 3:03 pm

Re: FlashProManager 2.6.7.0 & 2.6.8.0

Post by fizeks » Fri May 19, 2017 10:31 pm

i updated to the 2.6.9.0 flashpro manager earlier today and safe to say that the orange datalog led issue is fixed for me. all back to normal now thanks!
those with the issue should update for the fix.

Arwin21
Posts: 6
Joined: Tue Jul 12, 2016 2:14 pm

Re: FlashProManager 2.6.7.0 & 2.6.8.0

Post by Arwin21 » Fri May 26, 2017 7:16 am

Hi,
after the last update 2.6.9.0. the radiator fan of my Civic Type R FN2 doesn't work.
In the traffic the engine has reached 98°C (!) and the fan has not activated. I'm worried ...

I use the Group N calibration.

User avatar
Hondata
Site Admin
Posts: 8767
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: FlashProManager 2.6.7.0 & 2.6.8.0

Post by Hondata » Fri May 26, 2017 7:22 am

Nothing has been changed for the FN2. 98C is not high for coolant - the fan normally will not switch on until the radiator return reaches a certain temperature, no the cylinder head outlet temperature.
Hondata

Arwin21
Posts: 6
Joined: Tue Jul 12, 2016 2:14 pm

Re: FlashProManager 2.6.7.0 & 2.6.8.0

Post by Arwin21 » Fri May 26, 2017 7:45 am

In Gr.N calibration on the "misc parameter" page there is
Radiator Fan ON 93°C
Radiator Fan OFF 90°C

???

User avatar
Hondata
Site Admin
Posts: 8767
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: FlashProManager 2.6.7.0 & 2.6.8.0

Post by Hondata » Fri May 26, 2017 11:29 am

The fan is switched based on the radiator return temperature (ECT2) and you're looking at the cylinder head outlet temperature (ECT).
Hondata

Post Reply