Ever since I update my FlashPro Manager to v2.7.3 (which pushed an update to my FlashPro as well), I keep getting an error "The ECU VIN has not been recorded. Connect the FlashPro to the vehicle and switch the ignition on to record the VIN" error. I followed the instructions on the error and when I disconnect the FlashPro from my car I am able to upload a calibration. Problem is, this is happening each time now, where I have to connect it to my car before I am able to upload a different calibration. Before the update, I was able to upload a calibration without getting any errors or having to connect it to my car first.
Could this be an issue with the FlashPro Manager or FlashPro itself?
FlashPro Serial #
FP-16CIVIC-L15T-202251
Used on:
2017 Honda Civic Hatchback LX (6MT)
FlashPro Manager 2.7.3
FlashPro Manager 2.7.3
- Attachments
-
- flashpro error.jpg (49.92 KiB) Viewed 1264 times
Re: FlashPro Manager 2.7.3
Unplug your FlashPro while the key is still in the on position and it should retain the VIN for the next time it is plugged into the laptop.
Re: FlashPro Manager 2.7.3
Thank you! I will try this process.