FlashProManager V2.8.7

FlashPro Manager software
zaramatt
Posts: 2
Joined: Mon Apr 03, 2017 11:23 pm

Re: FlashProManager V2.8.7

Post by zaramatt »

So using a window switch to a relay controlling a 5v source instead of the ethanol sensor. Would this work for a dry nitrous system? Could you retard timing and add fuel with the 5 volt signal?
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: FlashProManager V2.8.7

Post by Hondata »

It might work, but we would not recommend it since the ethanol input is designed for flex fuel.
Hondata
User avatar
R-12914
Posts: 349
Joined: Sun Dec 01, 2013 12:13 pm
Location: Germany/Bavaria

Re: FlashProManager V2.8.7

Post by R-12914 »

typer86 wrote: Mon Jan 08, 2018 7:15 am Issue for: Civic SI/FN2 (Type-R) 2006:
If gear is in neutral and the clutch is not pressed, the engine is revving high until limiter! (overrevving)

Is this normal? Before the engine stop revving until 4500 rpm.

Please fix this.

Thx
Yes,

this function is unfortunately no longer available, since the change to set the "launch limiter" and "full throttle shift", etc. in FP-manager.

Actually, Honda has installed this function for engine protection in standstill (protection against overheating)!
2008 Honda Civic TypeR FN2
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185
Post Reply