New Flaspro user, Ecu NOT Detected HELP

FlashPro Manager software
Post Reply
Mike37650
Posts: 2
Joined: Thu May 24, 2018 5:27 pm
Location: Erwin, TN

New Flaspro user, Ecu NOT Detected HELP

Post by Mike37650 » Thu May 24, 2018 5:44 pm

Hello, my name is Mike, im a very first time Hondata Flashpro user, i did everything correct and exactly like was asked of me, everything worked great until its time to Lock Flashpro to my car, It NEVER finds my VIN to Lock it, it says OBD is Connected but wont detect my ecu to get my vin. Please help me.
I have a 2005 Acura TSX 6speed.

User avatar
Hondata
Site Admin
Posts: 8815
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: New Flaspro user, Ecu NOT Detected HELP

Post by Hondata » Thu May 24, 2018 6:05 pm

The 05 TSX requires an ECU swap and adapter cable.

https://www.hondata.com/products/flashp ... -2004-2006

What FlashPro do you have? Have you swapped ECUs and installed the CAN adapter to the OBDII port?
Hondata

Mike37650
Posts: 2
Joined: Thu May 24, 2018 5:27 pm
Location: Erwin, TN

Re: New Flaspro user, Ecu NOT Detected HELP

Post by Mike37650 » Thu May 24, 2018 6:12 pm

I have FlashPro TSX-US-90787. And no i have not done anything to my ECU or anything. I bought the Flashpro NEW from NoLimitMotorSport and it didnt say anything about needing a different ECU. It actually says Plug and Play, also says No ECU modification required.

User avatar
Spunkster
Site Admin
Posts: 18083
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: New Flaspro user, Ecu NOT Detected HELP

Post by Spunkster » Fri May 25, 2018 10:10 am

https://www.hondata.com/products/flashp ... ?filter=15

Our website clearly states that you must use the 07-08 ECU and an adapter cable.

Post Reply