Unstable Operation / Rapid Flashing Power LED

FlashPro Manager software
Post Reply
Accord2008
Posts: 9
Joined: Mon Apr 02, 2018 2:03 pm

Unstable Operation / Rapid Flashing Power LED

Post by Accord2008 » Fri Dec 14, 2018 5:25 pm

Hi!

Randomly the Power LED flashes rapidly and can only be cured by completely disconnect the USB and OBD2 connection.
This happens when using the Flashpro stand-alone, just for data logging use or during a tuning session with the Laptop connected.
I noticed now on 3-4 different Flashpro Units (Friends, Customers and my own). Cars where Civic Si, Civic FN2 and Accord 2008+.

What does the rapid flash mean?
Can this be fixed? This cannot be normal, such an unstable operation?!

Thank you.

User avatar
Spunkster
Site Admin
Posts: 18080
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Unstable Operation / Rapid Flashing Power LED

Post by Spunkster » Fri Dec 14, 2018 5:36 pm

From Help, About, what is the version of software you are using?

chris2000
Posts: 51
Joined: Thu Oct 05, 2006 6:35 pm
Location: Asia

Re: Unstable Operation / Rapid Flashing Power LED

Post by chris2000 » Fri Dec 14, 2018 9:27 pm

this had happend to us plenty of time on different flashpro and cars. But a simple fix to pull out from obd and usb and install back solves it.

Accord2008
Posts: 9
Joined: Mon Apr 02, 2018 2:03 pm

Re: Unstable Operation / Rapid Flashing Power LED

Post by Accord2008 » Mon Dec 17, 2018 7:00 am

Spunkster wrote:
Fri Dec 14, 2018 5:36 pm
From Help, About, what is the version of software you are using?
I use all the time the latest official (not beta) Version. So this time it was Version 3.1.8.0

chris2000 wrote:
Fri Dec 14, 2018 9:27 pm
this had happend to us plenty of time on different flashpro and cars. But a simple fix to pull out from obd and usb and install back solves it.
Thank you! Good to know it does not just happens to me.

Post Reply