FlashProManager 3.4.0.0

FlashPro Manager software
Post Reply
User avatar
Hondata
Site Admin
Posts: 8630
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

FlashProManager 3.4.0.0

Post by Hondata » Wed Jun 12, 2019 3:21 pm

V3.4.0 (12 Jun 2019)
  • FlashPro firmware updated to version 163
  • Added button to create default graph templates
  • [2017+ FK8 Civic Type R] Added CARB calibrations
  • [2017+ FK8 Civic Type R] Added +R mode startup option
  • [2017+ FK8 Civic Type R] Added tach reflash progress indicator
  • [2018+ Turbo Accord 2.0] Added calibrations for CTR turbo
  • [2018+ Turbo Accord 2.0] Added Flex Fuel support
  • [2018+ Turbo Accord 2.0] Added boost by gear limit
  • [2017 US Civic Si] Added 4 bar MAP sensor support
  • [2017 US Civic Si] Added adjustable ignition floor for anti lag and RPM activation parameter for launching
Accord 2.0T gets flex fuel support.

FK8 gets +R mode on startup and reflash indication. Also the FK8 has calibrations for the CARB certified version.

2017 Si gets 4 bar MAP support (2018-2019 Si coming soon). Note both MAP sensors need to be replaced.

Download here
Hondata

AnnDee4444
Posts: 2
Joined: Thu Jun 27, 2019 1:18 pm

Re: FlashProManager 3.4.0.0

Post by AnnDee4444 » Thu Jun 27, 2019 1:36 pm

I updated to 3.4.0.0 and as usual the Flashpro wants to be updated immediately after plugging into USB. From this point the software goes non-responsive, and will never recover (I waited 9 hours).

I have tried on two computers, on different USB 2 & 3 ports, reinstalled the software multiple times, and reinstalled the USB drivers. I tried contacting support, but so far the best they can offer is to RMA the Flashpro. I doubt this is a hardware issue, as it was working fine before the update, and it worked on the second computer with the older version after causing the first computer to crash. I mistakenly updated the software on the second computer though, so I currently have no working Flashpro Manager.

Does anyone have any advice on how to get this working again? Support is unwilling to let me download an older version, and I am not wanting to spend $50 to ship it back for something I doubt is an issue.

AnnDee4444
Posts: 2
Joined: Thu Jun 27, 2019 1:18 pm

Re: FlashProManager 3.4.0.0

Post by AnnDee4444 » Thu Jun 27, 2019 1:40 pm

FWIW: I don't think the firmware is updating, since it crashes the software immediately. It should work fine if I can somehow find 3.3.9.0.

Post Reply