VSA disabled in Flashpro TSX
VSA disabled in Flashpro TSX
I disabled VSA in flashpro for my TSX, but it didn’t do anything after I flashed it. Still have to press the VSA OFF button to turn it off every time I started the car. Any help would be appreciated TIA.
Re: VSA disabled in Flashpro TSX
What year TSX are you referring to?
Re: VSA disabled in Flashpro TSX
04, but using 07 ECU.
Re: VSA disabled in Flashpro TSX
Disabling the VSA in the software does not fully disable it. You must still disable it via the switch in the dash.
Re: VSA disabled in Flashpro TSX
So what exactly it does when disabled it in the software?
Re: VSA disabled in Flashpro TSX
It stops the ECU from acting on the communication from the VSA to close the throttle & retard the ignition. It was put in there for race cars. If you still have the VSA module then eventually the VSA gets upset and starts to throw errors or restrict engine output.
Hondata
Re: VSA disabled in Flashpro TSX
Ok I see. No wonder sometime the car the throwing the VSA errors. Had to restart the car then it went away LOL.