VSA disabled in Flashpro TSX

FlashPro Manager software
Post Reply
kenmaster
Posts: 5
Joined: Thu Mar 05, 2015 9:39 pm

VSA disabled in Flashpro TSX

Post by kenmaster »

I disabled VSA in flashpro for my TSX, but it didn’t do anything after I flashed it. Still have to press the VSA OFF button to turn it off every time I started the car. Any help would be appreciated TIA.
User avatar
Spunkster
Site Admin
Posts: 22703
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: VSA disabled in Flashpro TSX

Post by Spunkster »

What year TSX are you referring to?
kenmaster
Posts: 5
Joined: Thu Mar 05, 2015 9:39 pm

Re: VSA disabled in Flashpro TSX

Post by kenmaster »

04, but using 07 ECU.
User avatar
Spunkster
Site Admin
Posts: 22703
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: VSA disabled in Flashpro TSX

Post by Spunkster »

Disabling the VSA in the software does not fully disable it. You must still disable it via the switch in the dash.
kenmaster
Posts: 5
Joined: Thu Mar 05, 2015 9:39 pm

Re: VSA disabled in Flashpro TSX

Post by kenmaster »

So what exactly it does when disabled it in the software?
User avatar
Hondata
Site Admin
Posts: 10428
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: VSA disabled in Flashpro TSX

Post by Hondata »

It stops the ECU from acting on the communication from the VSA to close the throttle & retard the ignition. It was put in there for race cars. If you still have the VSA module then eventually the VSA gets upset and starts to throw errors or restrict engine output.
Hondata
kenmaster
Posts: 5
Joined: Thu Mar 05, 2015 9:39 pm

Re: VSA disabled in Flashpro TSX

Post by kenmaster »

Ok I see. No wonder sometime the car the throwing the VSA errors. Had to restart the car then it went away LOL.
Post Reply