R18 new air intake system

FlashPro Manager software
Post Reply
Kevin1166
Posts: 16
Joined: Sat Aug 12, 2017 7:30 am

R18 new air intake system

Post by Kevin1166 » Mon Sep 02, 2019 9:56 am

Hello

R18 engine Hondata flashpro manager.
I have changed Air intake system From K&N SRI (pipe2.5"Mass flow) to New Air intake system (pipe3"Mass flow)
What values ​​do I need to adjust? To accommodate this change

thankyou

User avatar
Hondata
Site Admin
Posts: 8783
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: R18 new air intake system

Post by Hondata » Mon Sep 02, 2019 7:52 pm

The AFM Flow table until your fuel trims are close to 0.
Hondata

Kevin1166
Posts: 16
Joined: Sat Aug 12, 2017 7:30 am

Re: R18 new air intake system

Post by Kevin1166 » Thu Sep 05, 2019 9:07 am

Thank you for your suggestion

Civic R18 Calibrations
Can you explain the adjustment in the window ignition retard gear compensation
if I increase or decrease what will happen to fuel and ignition?
Attachments
Ignition retard gear compensation.png
Ignition retard gear compensation.png (25.99 KiB) Viewed 301 times

User avatar
Spunkster
Site Admin
Posts: 18023
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: R18 new air intake system

Post by Spunkster » Thu Sep 05, 2019 9:46 am

You should leave that adjustment alone until after all other tuning is done. In most cases that should never be changed.

Kevin1166
Posts: 16
Joined: Sat Aug 12, 2017 7:30 am

Re: R18 new air intake system

Post by Kevin1166 » Thu Sep 05, 2019 9:57 am

Spunkster wrote:
Thu Sep 05, 2019 9:46 am
You should leave that adjustment alone until after all other tuning is done. In most cases that should never be changed.
I will follow your instruction
thank you

Post Reply