R18 new air intake system

FlashPro Manager software
Post Reply
Kevin1166
Posts: 22
Joined: Sat Aug 12, 2017 7:30 am

R18 new air intake system

Post by Kevin1166 »

Hello

R18 engine Hondata flashpro manager.
I have changed Air intake system From K&N SRI (pipe2.5"Mass flow) to New Air intake system (pipe3"Mass flow)
What values ​​do I need to adjust? To accommodate this change

thankyou
User avatar
Hondata
Site Admin
Posts: 10428
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: R18 new air intake system

Post by Hondata »

The AFM Flow table until your fuel trims are close to 0.
Hondata
Kevin1166
Posts: 22
Joined: Sat Aug 12, 2017 7:30 am

Re: R18 new air intake system

Post by Kevin1166 »

Thank you for your suggestion

Civic R18 Calibrations
Can you explain the adjustment in the window ignition retard gear compensation
if I increase or decrease what will happen to fuel and ignition?
Attachments
Ignition retard gear compensation.png
Ignition retard gear compensation.png (25.99 KiB) Viewed 1444 times
User avatar
Spunkster
Site Admin
Posts: 22703
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: R18 new air intake system

Post by Spunkster »

You should leave that adjustment alone until after all other tuning is done. In most cases that should never be changed.
Kevin1166
Posts: 22
Joined: Sat Aug 12, 2017 7:30 am

Re: R18 new air intake system

Post by Kevin1166 »

Spunkster wrote: Thu Sep 05, 2019 9:46 am You should leave that adjustment alone until after all other tuning is done. In most cases that should never be changed.
I will follow your instruction
thank you
Post Reply