FlashPro Manager

FlashPro Manager software
Post Reply
ray67
Posts: 3
Joined: Mon Sep 09, 2019 9:26 am

FlashPro Manager

Post by ray67 » Mon Sep 09, 2019 10:28 am

Hey, I updated falshpro manager on my desktop this weekend( prior to this update everything was work). I tried connecting OBD2 to my computer and it's not connecting to the car. I have 2018 Honda civic. Thank you

d_butl3r
Posts: 5
Joined: Mon Jul 30, 2018 10:38 am

Re: FlashPro Manager

Post by d_butl3r » Mon Sep 09, 2019 3:02 pm

does the driver have a green check mark next to it? bottom right of screen...

ray67
Posts: 3
Joined: Mon Sep 09, 2019 9:26 am

Re: FlashPro Manager

Post by ray67 » Mon Sep 09, 2019 5:46 pm

yes it does

User avatar
Spunkster
Site Admin
Posts: 18022
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: FlashPro Manager

Post by Spunkster » Tue Sep 10, 2019 10:56 am

Unplug the USB and the OBD2 port and then only plug in the USB with the FlashPro manager software. It should update the firmware.

ray67
Posts: 3
Joined: Mon Sep 09, 2019 9:26 am

Re: FlashPro Manager

Post by ray67 » Tue Sep 10, 2019 4:58 pm

Spunkster wrote:
Tue Sep 10, 2019 10:56 am
Unplug the USB and the OBD2 port and then only plug in the USB with the FlashPro manager software. It should update the firmware.
Hey
I'm getting the following error

The last Flashpro upload failed
Failure information : Code 0 step 0 address 0x000000
Explanation: There is a fault with the flashpro hardware

User avatar
Spunkster
Site Admin
Posts: 18022
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: FlashPro Manager

Post by Spunkster » Wed Sep 11, 2019 9:07 am

With everything plugged in and the ignition in the on position, go to the Help menu and click on “send feedback”. Include a detailed description of the issue.

Post Reply