Page 1 of 1

FlashPro Manager

Posted: Mon Sep 09, 2019 10:28 am
by ray67
Hey, I updated falshpro manager on my desktop this weekend( prior to this update everything was work). I tried connecting OBD2 to my computer and it's not connecting to the car. I have 2018 Honda civic. Thank you

Re: FlashPro Manager

Posted: Mon Sep 09, 2019 3:02 pm
by d_butl3r
does the driver have a green check mark next to it? bottom right of screen...

Re: FlashPro Manager

Posted: Mon Sep 09, 2019 5:46 pm
by ray67
yes it does

Re: FlashPro Manager

Posted: Tue Sep 10, 2019 10:56 am
by Spunkster
Unplug the USB and the OBD2 port and then only plug in the USB with the FlashPro manager software. It should update the firmware.

Re: FlashPro Manager

Posted: Tue Sep 10, 2019 4:58 pm
by ray67
Spunkster wrote: Tue Sep 10, 2019 10:56 am Unplug the USB and the OBD2 port and then only plug in the USB with the FlashPro manager software. It should update the firmware.
Hey
I'm getting the following error

The last Flashpro upload failed
Failure information : Code 0 step 0 address 0x000000
Explanation: There is a fault with the flashpro hardware

Re: FlashPro Manager

Posted: Wed Sep 11, 2019 9:07 am
by Spunkster
With everything plugged in and the ignition in the on position, go to the Help menu and click on “send feedback”. Include a detailed description of the issue.