Car not starting after flashing tune

FlashPro Manager software
Post Reply
ed_rod5
Posts: 3
Joined: Sat Dec 21, 2019 2:47 pm

Car not starting after flashing tune

Post by ed_rod5 »

2018 Honda Civic type r - Hondata serial #: FP-CTR-FK8-351003

After installing the Sirimoto flex fuel kit, I am trying to flash the flex fuel kit tune. The tune uploads and Hondata software instructs to turn off the ignition. After that the program doesn’t show us that the tune was successful. I turn the car off then turn it back on and nothing. The dash is lit up with check engine light, tpms, etc. any help would be appreciated

ed_rod5
Posts: 3
Joined: Sat Dec 21, 2019 2:47 pm

Re: Car not starting after flashing tune

Post by ed_rod5 »

The messages on the display consist of rev match system problem and drive carefully systems initializing....

User avatar
Hondata
Site Admin
Posts: 9156
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Car not starting after flashing tune

Post by Hondata »

Please use the 'send feedback' function with the FlashPro plugged in and ignition on.

Then return the ECU to stock (not stock equivalent) and try that.
Hondata

ed_rod5
Posts: 3
Joined: Sat Dec 21, 2019 2:47 pm

Re: Car not starting after flashing tune

Post by ed_rod5 »

I had a DTC. P0102. Turns out had a 5A on the flexfuel jumper instead of 10A connected to the under dash ACG slot. The car started right up. Although the ethanol gauge does not work anymore. Thank you for your time!!!

Post Reply