Car wont start after Re flashing

FlashPro Manager software
Post Reply
brimac1
Posts: 2
Joined: Sat Feb 01, 2020 4:58 am

Car wont start after Re flashing

Post by brimac1 »

My civic hatchback 1.5 CVT won't start after a reflash, I have reflashed it before and it worked but after testing it out and noticing it fails to change gears I wanted to return it to stock to put it on the +3 psi option.

When I press down on the brake and press the start button it does not start but the dash does light up. I'm not sure if I should keep trying to reflash to stock.


This is the error code I get.

The last Flashpro upload failed.
Failure information : code 0x05 Step 16 Address
0x0FFF00
Explanation: The ECU stopped responding while
reflashing. Check OBDII connector pins

User avatar
Hondata
Site Admin
Posts: 9157
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Car wont start after Re flashing

Post by Hondata »

Make sure the software is up to date. Check the pins on the connector are not bent. Download to the FlashPro again and try again until it works.
Hondata

Post Reply