Eld and fuel metering check engine light

FlashPro Manager software
Post Reply
Undefined4door
Posts: 6
Joined: Wed Feb 19, 2020 12:42 am

Eld and fuel metering check engine light

Post by Undefined4door »

To make a long story short I have a plx wideband hooked and using the eld input as suggested, set it up in flashpro. I have been getting the eld code for awhile p1298. I'm also getting a code for fuel metering too rich p0172. Is there anything in setting I could disable for this?

User avatar
Spunkster
Site Admin
Posts: 18624
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Eld and fuel metering check engine light

Post by Spunkster »

What vehicle are you referring to?

Undefined4door
Posts: 6
Joined: Wed Feb 19, 2020 12:42 am

Re: Eld and fuel metering check engine light

Post by Undefined4door »

2005 acura tsx 6spd sprry

User avatar
Spunkster
Site Admin
Posts: 18624
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Eld and fuel metering check engine light

Post by Spunkster »

Why not use B12 or B22 instead of the ELD for the sideband input?

Undefined4door
Posts: 6
Joined: Wed Feb 19, 2020 12:42 am

Re: Eld and fuel metering check engine light

Post by Undefined4door »

Most people used the eld input as does the wideband install recommends the eld input but if b12 can be used I'll just switch it

Undefined4door
Posts: 6
Joined: Wed Feb 19, 2020 12:42 am

Re: Eld and fuel metering check engine light

Post by Undefined4door »

Any thoughts on the p0172 code cause?

User avatar
Spunkster
Site Admin
Posts: 18624
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Eld and fuel metering check engine light

Post by Spunkster »

The ECU does not use the aftermarket wideband signal to make any adjustments or throw errors. If it is saying it is too rich then you will need to lean it out.

Post Reply