missing tabs

FlashPro Manager software
Post Reply
reallyflyguy
Posts: 6
Joined: Thu Jan 28, 2021 10:52 pm

missing tabs

Post by reallyflyguy »

Just diving into the world of Flashpro so be patient, please. I'm helping a friend out getting his 9th gen civic Si tuned and learning the system as I'm seasoned with my 6-6 Accord. We have a tune loaded and are clicking and checking out all the options available. We noticed that we can't select Vtec or Rev limits in Calibrations. I'm confused? Glitch or am I blind??
User avatar
Hondata
Site Admin
Posts: 10428
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: missing tabs

Post by Hondata »

Those options are in the Calibration window under VTEC and Rev Limits. Can you provide a screen shot?
Hondata
reallyflyguy
Posts: 6
Joined: Thu Jan 28, 2021 10:52 pm

Re: missing tabs

Post by reallyflyguy »

Yes, I know exactly where you mean to look.

We uninstalled and reinstalled the software last night to make sure we were using the latest software and made sure the Flashpro was updated. Then we reloaded the tune into the car. Everything is up to date. When you click on either table in the calibrations menu, nothing happens.
Please try yourself and let me know if I'm crazy!... lol

We've tried about everything. It's live to the car, everything has a green checkmark.

FYI we're working on a 14 civic SI
User avatar
Hondata
Site Admin
Posts: 10428
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: missing tabs

Post by Hondata »

Hondata wrote: Fri Jan 29, 2021 9:54 amCan you provide a screen shot?
Hondata
reallyflyguy
Posts: 6
Joined: Thu Jan 28, 2021 10:52 pm

Re: missing tabs

Post by reallyflyguy »

There's not much to screenshot. When I say nothing happens when I click on the "vtec" or "rev limit" tabs I really mean nothing...
Attachments
Screenshot (2).png
Screenshot (2).png (178.85 KiB) Viewed 1069 times
User avatar
Hondata
Site Admin
Posts: 10428
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: missing tabs

Post by Hondata »

What calibration are you using?
Hondata
reallyflyguy
Posts: 6
Joined: Thu Jan 28, 2021 10:52 pm

Re: missing tabs

Post by reallyflyguy »

I'll screenshot it...
Attachments
Screenshot (3).png
Screenshot (3).png (126.9 KiB) Viewed 1045 times
User avatar
Hondata
Site Admin
Posts: 10428
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: missing tabs

Post by Hondata »

I should have seen this earlier. Close the table window, increase the size of the calibration window.
Hondata
Post Reply