FK8 Datalog Sensors Showing No Data Flash Pro

FlashPro Manager software
Post Reply
LKCorbz
Posts: 2
Joined: Sun Mar 07, 2021 10:14 am

FK8 Datalog Sensors Showing No Data Flash Pro

Post by LKCorbz »

Hello Apologies if this obvious, I am new to Hondata Flash Pro.

While using the Hondata Flash Pro I am not getting readings on a vast amount of sensors.
This includes Boost Pressure and Oil Pressure with what I believe to also be low fuel duty then expected (0-1% with the odd blip to 7%)
Also negative Knock Retard on Cylinders 2 and 4 of 85% and 75% respectively

I am running a stock FK8 with jailbroken ECU, no Calibrations have been uploaded to the car and BP does show on the drivers display, no error codes or warning lights.

FP-CTR-FK8-INT
FlashPro Manager 3.7.2.0
Datalog of a generic drive
UK/Europe FK8 Stock

Any Help is Greatly Appreciated
Attachments
Generic Drive Datalog.fpdl
(499.09 KiB) Downloaded 59 times
User avatar
Hondata
Site Admin
Posts: 10428
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: FK8 Datalog Sensors Showing No Data Flash Pro

Post by Hondata »

It is because you have not uploaded to the ECU.

If you want to datalog how the stock ECU drives then upload the 'factory settings'.
Hondata
LKCorbz
Posts: 2
Joined: Sun Mar 07, 2021 10:14 am

Re: FK8 Datalog Sensors Showing No Data Flash Pro

Post by LKCorbz »

Thankyou
Post Reply